Reflex Spiral Staircase

Produced by Albini & Fontanot the Reflex spiral staircase represent the very highest quality at a very good comparative value, the finished product combines natural wood stove-enamelled steel finishes and stainless steel which combines to deliver a gorgeous staircase at an affordable price.

Please note that the prices shown above are based upon a basic 13 rise 120cm diameter staircase only and does not include any accessories. These prices are indicative. For a full design and quotation service please contact our sales office on 0845 456 1088 or info@the-wooden-hill-company.co.uk

The Reflex is available in diameters of 110 - 120 - 130 - 140 - 150 and 160 cm. Designed to permit height adjustment during installation, the rise of each tread can range between 21.3 to 23.8 cm. The direction of rotation is also determined during installation.

The load-bearing centre column of the reflex spiral staircase consists of a modular galvanized steel internal column and steel central spacers or 'bobbins' with a thick epoxy powder stove-enamelled finish in the following colors: White (RAL 9010), Copper Black. A series of transparent polycarbonate components provide the hight adjustment.

The LUX railing of the staircase must consist of stainless steel balusters 27 mm in diameter x 2 mm minimum thickness with a glossy finish, and 7 parallel stainless steel rods, minimum thickness 4 mm, and must be affixed to two treads at the same time.

The TITAN railing of the staircase must consist of painted steel balusters 27 mm in diameter x 2 mm minimum thickness with a satin finish, and 7 parallel stainless steel rods, minimum thickness 4 mm, and must be affixed to two treads at the same time. The TITAN system offers a price saving over the LUX

The circular treads may be selected from varnished finger-jointed real solid beech, minimum thickness 42 mm, with a satin finish in the following shades: Clear Walnut, Blond Walnut, Dark Walnut and Cherry.

Alternatively varnished finger-jointed solid ash, minimum thickness 42 mm, with an open-grain finish in the following shades: Bleached, Teak, Tobacco, Cherry and Wengè, prepared ready for stacking on the central column and for installation of the railing using a special collets.

The modular handrail matches the treads and is made from real solid beech or ash with a circular section, minimum diameter 48 mm, and be affixed to the balusters using special die-cast aluminum brackets.

The landing balustrade is made using the same materials and components that make up the railing of the staircase and be coherent with its design.

The Reflex is in essence a kit based spiral staircase, the finish quality and attention to detail on the Reflex spiral staircase is of the very highest standard. The modular nature allowing the best quality components to be supplied at a price to suit your budget. The prices indicated are for a 13 tread basic staircase, price includes delivery. The Wooden Hill Company will produce a 'no obligation' plan drawing and detailed quotation for your Reflex spiral staircase based on your exact requirements click here to send us your project details.

The Reflex Spiral Staircase is suitable for a DIY project and comes with detailed installation instructions (which can be downloaded from the bottom of this page) and a DVD. Alternatively you can take advantage of our measuring and/or installation service if you want us to provide the complete service for the inclusion of a Reflex spiral staircase in your building project.

For further information please email zac@the-wooden-hill-company.co.uk